thick mode circuit and does not have the digital flavor of the current digital power amplifier. Moreover, it is an actual power
output of 200WX2 @ 4 Ohm. This model has many characteristics such as high efficiency, low heat generation, high power and
excellent sound effect, and can meet more than 99% of audio amplification requirements. In its PDF file, it is shown that each
channel can obtain 200W power under 4 ohm load, and the distortion (THD) is only 0.8%. This machine comes standard with a
switching power supply with an actual power of 600W to ensure an effective output power of 200WX2.
STK428-640 module adopts PWM CMOS logic level audio input mode. This audio input mode can effectively reduce noise, distortion and
interference, greatly improve the clarity, dynamic range and fidelity of the audio, so as to bring users a better listening
experience.
The power supply equipped with 600W is a real LLC power supply, and its resonant circuit is a high-frequency sine wave, not an
ordinary square wave switching power supply. This power supply is very suitable for
Power Amplifiers, with excellent results,
sales as high as 98%, and static power consumption of the whole machine at 19W. At the same time, its electromagnetic radiation is
low, which is beneficial to reduce the interference to the surrounding equipment.
This machine is a pure rear-stage power amplifier, which can be used with front-stage equipment according to requirements. The
rear-stage power is very strong. The measured 200W continuous output power is undistorted. It can easily push medium and large
bookshelves and floor speakers with high cost performance.
Output power: 200W+200W 4Ω 130W+130W 8Ω Measured
Type of power amplifier: Class D
Frequency response: 25Hz-25KHz
Magnification: 4Ω 63x 8Ω 48x
Static power consumption: 19W
Input impedance: 50KΩ
Input sensitivity: 680mV
Output impedance: 4-8Ω
Dimensions: 170 W *54 H *198 D mm
Weight: 1.48KG